Belong Modem Router Login - Default Password & Admin Access Guide 2026

What is Belong Modem Login

The Belong Modem Login is the gateway to your router's administrative settings, accessible through a private IP address like 10.0.0.138. This IP acts as your default gateway, allowing you to manage your home network directly. From the admin panel, you can configure WiFi passwords, monitor connected devices, and optimize your internet connection for better performance and security.

How to Login to Belong Modem Login

Accessing your Belong modem’s admin panel is a straightforward process. Follow these steps to get started:

1. Connect to Your Network: Ensure your computer or smartphone is connected to your Belong WiFi network or directly to the modem via an Ethernet cable.
2. Open a Web Browser: Launch any browser, such as Chrome, Safari, or Firefox.
3. Enter the Default Gateway: In the address bar, type http://10.0.0.138 and press Enter. This is the default private IP address for most Belong modems.
4. Enter Login Credentials: A login page will appear. Enter the default username and password. If you haven’t changed them, they are typically admin for the username and Belong for the password. Then, click the "Login" or "Sign In" button.

Once logged in, you will have full access to your router’s configuration interface.

Default Username and Password

For most Belong modems, the factory default login credentials are:

• Username: admin
• Password: Belong

It is crucial to note that these are standard defaults and vary across different router manufacturers. Leaving these credentials unchanged poses a significant security risk, as anyone connected to your network could potentially access and alter your router settings. It is strongly recommended to change the default password immediately after your first login to secure your home network.

What You Can Do After Login

The Belong Modem Login gives you access to a powerful control panel. Here are some of the key actions you can perform to manage and enhance your home network:

• Change WiFi Password and Network Name (SSID): Personalize your WiFi name and create a strong, unique password to prevent unauthorized access.
• View Connected Devices: See a list of all devices currently using your network, allowing you to identify and block unknown users.
• Configure Parental Controls: Set up access schedules and content filters to manage internet usage for children.
• Optimize WiFi Settings: Switch between 2.4GHz and 5GHz bands, adjust channels to reduce interference, and improve overall network performance.
• Update Router Firmware: Keep your modem’s software up to date to ensure you have the latest security patches and performance improvements.

Troubleshooting Belong Modem Login Not Working

It can be frustrating when you cannot access the admin panel. Below are common issues and their solutions.

Cannot access Belong Modem Login (Page not loading)

Possible Cause: The most common issue is using the wrong IP address. Your router’s default gateway might have been changed or is different from the standard one.

Solution:

1. Find the correct IP address:
   • On Windows: Open Command Prompt, type ipconfig, and press Enter. Look for the "Default Gateway" under your active network connection.
   • On Mac: Open System Settings > Network, select your active connection, and click "Details." The router address will be listed as "Router."
2. Check your connection: Ensure your device is connected to the Belong network. A loose Ethernet cable or a disconnected WiFi can prevent the page from loading.
3. Try a different browser: Occasionally, browser cache or extensions can cause issues. Try an alternative browser or open an incognito/private window.

No response after entering the IP address

Possible Cause: The router may be unresponsive, or there’s a network configuration conflict.

Solution:

1. Power cycle your modem: Unplug your Belong modem from the power outlet, wait for 30 seconds, and plug it back in. Allow it a few minutes to fully restart and re-establish the connection, then try logging in again.
2. Temporarily disable your firewall: A third-party firewall or security suite can sometimes block access to local IP addresses. Temporarily disable it to test, and if it resolves the issue, create an exception for your router’s IP address.

Login failed (Incorrect username/password)

Possible Cause: The default credentials were changed, or you are entering them incorrectly.

Solution:

1. Check for typos: Ensure the username and password are entered correctly. The password is often case-sensitive.
2. Reset your router to factory settings: If you have forgotten your custom password, you will need to perform a factory reset. Locate the small reset button on the back or bottom of your modem. Using a paperclip, press and hold the button for 10-15 seconds until the lights on the modem blink. This will revert all settings, including the IP address and login credentials, back to the defaults printed on the modem’s sticker.
3. Check the sticker on your modem: The default IP address, username, and password are often printed on a sticker on the bottom or back of the modem hardware itself.

Frequently Asked Questions

How do I login to my Belong modem?

To login to your Belong modem, connect to your WiFi, open a browser, and enter http://10.0.0.138 in the address bar. Then, use the default username admin and password Belong to access the admin panel.

What is the default password for Belong Modem Login?

The default password for the Belong Modem Login is typically Belong. The username is usually admin. You can also find this information on the sticker located on the back or bottom of your modem.

Why is my Belong Modem Login not working?

If the Belong Modem Login is not working, it’s often due to using the wrong IP address, a network connection issue, or incorrect login credentials. Try power-cycling your modem, verifying the default gateway via your computer’s network settings, or performing a factory reset.

How do I change my Belong WiFi password?

After completing the Belong Modem Login, navigate to the "Wi-Fi" or "Wireless" section of the admin panel. Look for a field labeled "Network Key," "WiFi Password," or "WPA/WAPI passphrase," enter your new password, and click "Save" or "Apply."

Where is the reset button on my Belong modem?

The reset button is a small, recessed button usually found on the back or bottom panel of your Belong modem. You’ll need a pointed object like a paperclip to press and hold it for about 10-15 seconds to reset your modem to its factory settings.

Can I use the Belong Modem Login to see who is using my WiFi?

Yes, once you are logged into the admin panel, look for a section called "Attached Devices," "Connected Devices," or "DHCP Clients." This will show you a list of all devices currently connected to your network.

Is the Belong Modem Login IP address always 10.0.0.138?

While 10.0.0.138 is the default IP for most Belong modems, it can be changed. If you can’t access the login page, you should verify the correct default gateway address by checking your computer’s network connection details.

What should I do after I log in for the first time?

After your first successful Belong Modem Login, you should immediately change the default password to a strong, unique one to secure your network. It’s also a good time to set a personalized WiFi name and password.