http://Izzi Modem Login in the address bar. Use default credentials (usually admin/admin or admin/password) to access the admin panel. Change your password immediately for security. Izzi Modem Login Tool: Access & Configure Your Router
What is Izzi Modem Login?
The Izzi Modem Login is the gateway to your router's admin panel, accessed through a private IP address, typically 192.168.0.1. This IP, known as your default gateway, acts as the entry point to a web-based interface where you can manage all aspects of your home network. Using this tool, you can configure your WiFi password, monitor connected devices, and troubleshoot internet issues directly from your browser.
How to Login to Izzi Modem Login
Gaining access to your Izzi modem’s settings is a straightforward process. Follow these steps to reach the admin panel:
- Connect to Your Network: Ensure your computer or smartphone is connected to your Izzi WiFi network or directly to the modem via an Ethernet cable.
- Open a Web Browser: Launch any browser, such as Chrome, Safari, or Firefox.
- Enter the Default Gateway: In the address bar, type your modem’s IP address and press Enter. The most common address is
http://192.168.0.1. If that doesn't work, check the sticker on your modem for the correct IP. - Enter Login Credentials: A login page will appear. Enter the username and password for your modem.
- Access the Admin Panel: Click the login button to access the main dashboard, where you can view and modify your router settings.

Default Username and Password
If you haven't changed your modem’s login details, you will need the default username and password. These credentials vary depending on the brand and model of your Izzi modem. Often, they are printed on a sticker located on the back or bottom of the device.
Here are the default credentials for common Izzi modem models:
| Brand | Model | IP Address | Username | Default Password |
|---|---|---|---|---|
| Arris | TG2482, G3442ANA | 192.168.0.1 | admin | Preshared Key (on sticker) |
| Arris | TG1652, TM802, TG862 | 192.168.0.1 | admin | password |
| Arris | 552G | 192.168.2.1 | (Leave blank) | (Leave blank) |
| Technicolor | CGA4233TLV2 | 192.168.0.1 | user | (on sticker) |
| Technicolor | TC83005C | 10.0.0.1 | admin | password |
| Hitron | CHITA 3.1 / CGNV5 | 192.168.0.1 | cusadmin | password |
| Hitron | CDE 30364 | 192.168.0.1 | admin | admin |
| Cisco | DPC3925 | 192.168.0.1 | cisco | cisco |
| Ubee | DVW324 / U10c059 | 192.168.0.1 | user | user |
| SAGEMCOM | FAST3890V3 | 192.168.0.1 | admin | (on sticker) |
| ZTE | F680 / F689 | 192.168.1.1 | user | user |
Important Security Note: Leaving your router’s login credentials as the default poses a significant security risk. It is highly recommended to change the admin password as soon as you first log in to prevent unauthorized access to your network.
What You Can Do After Login
Once you’ve successfully completed the Izzi modem login, you unlock a suite of powerful tools to manage and secure your home network. The admin panel allows you to:
- Change WiFi Password & Network Name (SSID): Secure your network by creating a unique, strong password. You can also rename your WiFi to something easily identifiable.
- View Connected Devices: See a list of all devices currently connected to your network, helping you spot any unauthorized users.
- Update Router Firmware: Keep your modem’s software up-to-date to ensure optimal performance, stability, and security.
- Adjust Parental Controls: Set time limits and block specific websites to manage internet access for children.
- Troubleshoot Connection Issues: Access diagnostic tools to check signal strength, reboot the modem remotely, and view system logs for error messages.

Troubleshooting Izzi Modem Login Not Working
It can be frustrating when you can’t access your modem’s settings. If your Izzi modem login isn't working, don’t worry. This is a common issue, and it usually has a simple fix. Use the troubleshooting steps below to resolve the problem.
Cannot Access Izzi Modem Login
Why it happens: This is often due to using the wrong IP address or a poor connection to the network.
Solution:
- Verify the IP Address: Double-check that you are entering the correct IP address. The most common is
192.168.0.1, but some models use192.168.1.1or10.0.0.1. Look for the sticker on your modem. - Check Your Connection: Make sure your device is connected to the modem’s WiFi or via an Ethernet cable. A connection to a different network (like a neighbor's) will not work.
- Use the Correct Protocol: Ensure you are typing
http://before the IP address, nothttps://.
Page Not Loading or "This Site Can't Be Reached"
Why it happens: This error usually indicates that your device cannot communicate with the modem, often due to an IP address conflict or a temporary glitch.
Solution:
- Restart Your Modem: Unplug the power cable from your Izzi modem, wait for 30 seconds, and then plug it back in. Wait a few minutes for it to fully reboot and then try accessing the login page again.
- Restart Your Device: A simple restart of your computer or smartphone can sometimes resolve network communication issues.
- Check Your Device’s IP: Ensure your device is set to obtain an IP address automatically (DHCP). A manually set static IP could be on the wrong subnet.
Login Failed (Incorrect Username/Password)
Why it happens: The most common reason is that the default password has been changed, or you are misreading the credentials on the modem sticker.
Solution:
- Check the Modem Sticker: Carefully re-examine the sticker on your modem. Some models use a unique "Preshared Key" as the password, while others use "user" or "admin."
- Factory Reset the Modem: If you have forgotten a custom password, you will need to perform a factory reset. Locate the small, recessed reset button on the back of the modem. Use a paperclip to press and hold the button for 10-15 seconds. This will restore all settings, including the login credentials, to their defaults. Note: This will also erase your custom WiFi name and password, so you will need to set them up again afterward.

Frequently Asked Questions
How do I perform an Izzi modem login?
To log in, connect to your WiFi, open a web browser, and enter your modem's default gateway IP address (usually 192.168.0.1). Then, enter the username and password found on the sticker on your modem.
What is the default password for Izzi modem login?
The default password varies by model. For many Arris models, it's "password". For others like Technicolor or SAGEMCOM, it's a unique "Preshared Key" or a code printed on the modem's sticker. Refer to the table in this guide for model-specific details.
Why is my Izzi modem login not working?
There are several common reasons: you might be using the wrong IP address, you could be disconnected from the network, or you might be entering the incorrect username and password. Try restarting your modem and double-checking the sticker on the device.
How can I change my Izzi WiFi password?
First, log in to the admin panel using your Izzi modem login. Then, navigate to the Wireless or WiFi section. Look for Security Settings and change the WPA Pre-Shared Key or WiFi Password field. Save your changes to apply the new password.
Where is the IP address for my Izzi modem?
The default IP address is almost always 192.168.0.1. However, you can verify this by checking the sticker on the back or bottom of your modem, which lists all the default login information.
Is it safe to use the default Izzi modem login password?
No, using the default password is a security risk. Anyone connected to your network could potentially log in and change your settings. It is strongly recommended to change the admin password to a strong, unique one immediately after your first login.
What should I do if I forgot my modem’s admin password?
If you’ve changed the password and forgotten it, you will need to perform a factory reset on the modem. Press and hold the reset button (usually a pinhole) on the back of the device for 10-15 seconds. This will restore all settings, including the default username and password.
🔒 Security Reminder
After logging into your Izzi Modem router, always change the default password to protect your network from unauthorized access. Use a strong password with at least 12 characters including letters, numbers, and special symbols.